ERROR MIDI Help pls :(

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #389746

    Before all i’m new member here, and i would like Thank to CCC for all this charts, thanks you so much <3

     

    recently, I put myself has to try to convert musics (i would like convert All Erock songs, And lot of Solo medley before all)

     

    That’s cool…. but i have EVERYTIME the same message Error…

     

    “ERROR: MIDI Complier: (MIDI FILE): Time division must be 480 ticks per quarter; this file is 960 ticks per quarter”

     

    I don’t know how divide per two this..

     

    I’ve some screen Capture:

     

    Beat => http://gyazo.com/28ff4ebe4f5ca1b1137c93f112e63cda

     

    Error Mess (With Magma) => http://gyazo.com/6dd26f1bbd55e3e73c70073ac0789552

     

    All the rest is ok, i miss just this.. i don’t understand why someone can help me ?

     

     

    PS: i’m french sorry for my aweful english :/

    #412199
    Farottone
    Keymaster

      “ERROR: MIDI Complier: (MIDI FILE): Time division must be 480 ticks per quarter; this file is 960 ticks per quarter”

      I’ve some screen Capture:

       

      Beat => http://gyazo.com/28ff4ebe4f5ca1b1137c93f112e63cda

       

      Right away, you slowed down your BEAT track, you can see it from the minipicture you uploaded. <img decoding=” src=”/wp-content/uploads/invision_emoticons/default_SA_smile.gif”> Delete the MIDI track and copy it over from our C3 template. Try again after that.

      #412203
      you slowed down your BEAT track, you can see it from the minipicture you uploaded.

       

      Slowed down ? How we make ? xD just shrink with left clic ?

       

      And your C3 template it’s MagmaC3 ? <img decoding=” src=”/wp-content/uploads/invision_emoticons/default_SA_smile.gif” />

       

      EDIT: My ERROR message WIth Magma C3

       

      “Welcome to MIDI Tester 1.0

      This program is intended to quickly let you test MIDI after MIDI for compliance with RBN2.0 standards.

       

      All you have to do is drag the MIDI file(s) here. This program will read through it, and create an adequate test project. MagmaCompiler is then called to process the MIDI for RBN2.0 compliance without actually compiling the song (so no time wasted compiling the audio).

       

      You can do back-to-back MIDIs without having to close this form.

       

      Ready to begin….

       

      Loaded MIDI file RBN Template.mid successfully.

      Found PART DRUMS …

      Found PART BASS …

      Found PART GUITAR …

      Found PART VOCALS …

      Nemo’s MIDI AutoGen process started at 14/01/2014 17:32:44

      Added drum mix events successfully.

      Nemo’s MIDI AutoGen process completed at 14/01/2014 17:32:44

      Starting Basic EMH Check

      WARNING: PART DRUMS Hard has the same amount or more notes than Expert

      WARNING: PART DRUMS Medium has the same amount or more notes than Hard

      WARNING: PART DRUMS Easy has the same amount or more notes than Medium

      WARNING: PART BASS Hard has the same amount or more notes than Expert

      WARNING: PART BASS Medium has the same amount or more notes than Hard

      WARNING: PART BASS Easy has the same amount or more notes than Medium

      WARNING: PART GUITAR Hard only has 5 notes but Expert has 2040 notes

      WARNING: PART GUITAR Medium has the same amount or more notes than Hard

      WARNING: PART GUITAR Easy has the same amount or more notes than Medium

      MIDI failed Basic EMH Check. This means the charts are most likely expert only

      Refer to the log to see which chart(s) reported problems

      Ready to send files to MagmaCompiler…hold on.

      Output from MagmaCompiler follows:

      MIDI Compiler: Starting…

      ERROR: MIDI Compiler: (MIDI FILE): Time division must be 480 ticks per quarter; this file is 960 ticks per quarter

      MIDI Compiler: Done.

      MagmaCompiler reported some errors. Please see the log for details on what must be fixed.

      Process completed in 0 minutes and 0 seconds.

      You may drag another MIDI or just click Close to exit.”

       

      <img decoding=” src=”/wp-content/uploads/invision_emoticons/default_SA_frown.gif” />

      #412209
      Farottone
      Keymaster

        If you haven’t already, download this:

        http://keepitfishy.com/d.php?51701e35e6956

         

        Use the C3 Template for Reaper. Now:

        1) Open your Reaper project, delete BEAT track

        2) Open C3 Template, copy BEAT track

        3) Go back to your Reaper project and paste BEAT track

         

        Now you have a working BEAT track.

        #412212

        Ok, i’ve DL your RBN Template

         

        I’ve delete my BEAT lane and switch with your new BEAT lane (copy past)

         

        Save it and retry to rend this but exactly the same message :/ (with your beat)

         

        I think i’ll try this with another song for fixed it :/

         

         

        EDIT: I’ve try with 2 different song same message and with yuor template…

        #412217
        Farottone
        Keymaster

          Make sure you’ve installed the RBN tools and plugins:

          viewtopic.php?f=12&t=6

          #412252
          AddyMills
          Participant

            What Farottone said, if you the plugins are installed, it should fix your error.

             

            Installing the plugins, in addition to making authoring easier, also changes the default Ticks Per Beat from 960 to 480, which is the issue you’re having. Go into preferences, go to the MIDI section, and make sure the box that says Ticks per Quarter Note has 480 as its value.

             

            As shown here:

             

             

             

            But also make sure those plugins are installed

            #412270

            Ok i’m fixed ! Thank you for your Screen my tools was on 960 ….

             

            Btw, Beat is Ok now.. but… new probleme yuhu >__<

             

             

            I’ve try to fix this but.. everytime the same probleme i cann’t fix it correctly ><

            #412276
            AddyMills
            Participant
              Ok i’m fixed ! Thank you for your Screen my tools was on 960 ….

               

              Btw, Beat is Ok now.. but… new probleme yuhu >__<

               

               

              I’ve try to fix this but.. everytime the same probleme i cann’t fix it correctly ><

               

              That happens when the [end] event is more than a quarter note away from the last note in the BEAT track. Either add a Beat note just before the end event (at this point all characters should be in realtime animation, so it won’t affect those) or move the end events closer to the last note in the Beat track.

              #412334

              I think I’ve Succeeds Event/BEAT problem… but one mistake resolve.. a new mistake appear yuhu

               

              Seriously it’s really hard :/

               

               

              I’ve One only pist (Guitar) i don’t know why i’ve this message or Pro Guitar and stuff…

              #412346
              AddyMills
              Participant
                I think I’ve Succeeds Event/BEAT problem… but one mistake resolve.. a new mistake appear yuhu

                 

                Seriously it’s really hard :/

                 

                 

                I’ve One only pist (Guitar) i don’t know why i’ve this message or Pro Guitar and stuff…

                 

                According to the picture you posted. Magma says it found a Pro Keys track, so I’m assuming all other tracks are in there too. If you only did guitar, make sure that the MIDI you exported only has the guitar, venue, beat and events tracks. Those 4 tracks should be the only ones in that MIDI.

                 

                When exporting the MIDI from Reaper, make sure that the radio button for “Selected tracks only” or something like that is selected. Otherwise Reaper will export all MIDI tracks that it finds in the project.

              Viewing 11 posts - 1 through 11 (of 11 total)
              • You must be logged in to reply to this topic.
              Back to top button